연구업적
논문 (최근 3년간의 실적)
| 년도 | 제목 |
|---|---|
| 2024-03-20 | Effects of a Liquid Metal Co-filler on the Properties of Epoxy/Binary Filler Composites |
| 2024-01-22 | A Rapid and Straightforward Liquid Metal Patterning Technique on Paper Using Laser Printer for Soft Electronics |
| 2023-10-28 | Active and Passive Modulation of Solar Light Transmittance in a Uniquely Multifunctional Dual-band Single Molecule for Smart Window Applications |
| 2023-07-20 | Novel Latent Heat Storage Systems Based on Liquid Metal Matrices with Suspended Phase Change Material Microparticles |
| 2023-05-09 | High-Thermal-Conductivity and High-Fluidity Heat Transfer Emulsion with 89 wt % Suspended Liquid Metal Microdroplets |
| 2023-04-01 | Control of the rheological properties of concentrated aqueous MXene sediment suspensions using polymeric additives |
| 2023-03-21 | Vitrification of Liquid Metal-in-Oil Emulsions Using Nano-Mineral Oxides |
| 2023-02-23 | High-Yield-Stress Particle-Stabilized Emulsion for Form-Factor-Free Thermal Pastes with High Thermal Conductivity, Stability, and Recyclability |
| 2023-01-25 | Stability of PVA-Adsorbed Alkane-in-Water Nanoemulsions: A Turbiscan Study |
| 2022-12-15 | 3D-printable, lightweight, and electrically conductive metal inks based on evaporable emulsion templates jammed with natural rheology modifiers |
| 2022-10-03 | Direct-Writable and Thermally One-Step Curable “Water-Stained” Epoxy Composite Inks |
| 2022-07-26 | Mobility of Sub-50 nm Iron Oxide Nanoparticles with Ultrahigh Initial Magnetic Susceptibility in Intact Berea Sandstone at High Salinity |
| 2022-04-07 | Liquid-Suspended and Liquid-Bridged Liquid Metal Microdroplets |
| 2022-03-22 | Effects of water-soluble polymers dissolved in an aqueous secondary fluid on the rheological properties of “capillary” suspensions |
| 2021-12-21 | Facile Deposition of Environmentally Benign Organic-Inorganic Flame Retardant Coatings to Protect Flammable Foam |
| 2021-10-08 | Electrostatic Stabilization of Nano Liquid Metals in Doped Nonpolar Liquids |
상훈 (최근 3년간의 실적)
| 년도 | 제목 |
|---|---|
| 2023-10-12 | 우수논문발표상 |
| 2023-04-21 | 우수 포스터 발표상 |
| 2022-11-04 | 우수논문상 |
| 2021-11-05 | 우수 논문상 |
| 2021-11-04 | 제11회 미원상사신진과학자상 |
| 2021-08-18 | 2020학년도 학술상 |
| 2021-04-23 | 우수 포스터 발표상 |
연구수탁 (최근 3년간의 실적)
| 년도 | 제목 |
|---|---|
| 2024-01-08 | Rhodococcus koreensis BT1균주로 발효한 유화 샘플의 특이 입자 구조 규명에 대한 공동 연구 |
| 2023-03-01 | [3-3차년도]액체금속 기반 콜로이드 다중상 계에 관한 연구: 분산상, 모관상, 연속상으로서의 액체금속 |
| 2022-03-01 | [3-2차년도]액체금속 기반 콜로이드 다중상 계에 관한 연구: 분산상, 모관상, 연속상으로서의 액체금속 |
| 2021-06-01 | [3-1차년도]액체금속 기반 콜로이드 다중상 계에 관한 연구: 분산상, 모관상, 연속상으로서의 액체금속 |
| 2021-05-20 | 유-수 계면흡착 친수성 미립자를 이용한 콘크리트 혼화제용 다기능성 유무기 하이브리드 소포제 개발 |
지적재산권 (최근 3년간의 실적)
| 년도 | 제목 |
|---|---|
| 2023-10-25 | 모세관 유체로 가교된 액체금속 미립자들로 이루어진 잉크타입 3D 프린팅 필라멘트 및 이의 제조방법 |
| 2023-06-29 | 잠열 저장 복합재, 이의 제조방법 및 이를 포함하는전열장치 |
| 2023-01-12 | 상전이 픽커링 에멀젼 및 이의 제조방법 |
| 2022-12-26 | 천연 유래 입자를 포함하는 잉크 조성물 |
| 2022-12-26 | 열경화성 수지 조성물 |
| 2022-12-19 | 초음파 처리 공정에 의한 열전도성 에멀션 |
| 2022-12-19 | 로터-스테이터 균질화 공정에 의한 열전도성 에멀션 |
| 2022-10-13 | 상전이 나노캡슐 제조방법 및 이를 이용하여 제조된 상전이 나노캡슐 |
| 2022-02-03 | 지중오염물질 흡착복합체 및 이의 제조방법 |
| 2022-01-11 | 모세관 유체로 가교된 액체금속 미립자들로 이루어진 잉크타입 3D 프린팅 필라멘트 및 이의 제조방법 |
학술대회발표 (최근 3년간의 실적)
| 년도 | 제목 |
|---|---|
| 2023-11-02 | Liquid Metal in Colloidal Multiphase Systems |
| 2023-10-26 | Effects of Liquid Metal Co-filler on the Properties of Epoxy/Binary Filler Composites |
| 2023-10-26 | 상전이물질 미립자들이 분산된 액체금속 매트릭스 기반 신 잠열 저장 계 |
| 2023-10-25 | 자외선 차단 및 피부 온도 조절이 동시에 가능한 선스크린용 픽커링 구조 상전이 캡슐 개발 |
| 2023-10-13 | Effects of Liquid Metal Co-filler on the Properties of Epoxy/Binary Filler Composites |
| 2023-10-12 | Novel Latent Heat Storage Systems Based on Liquid Metal Matrices with Suspended Phase Change Material Microparticles |
| 2023-04-21 | Liquid Metal as a Dispersion Medium of Colloidal Particles |
| 2023-04-20 | Liquid Metal as a Dispersion Medium of Colloidal Particles |
| 2022-11-04 | Spray-coatable high-concentration aqueous colloidal suspensions of multi-layer MXenes |
| 2022-11-04 | Improving the rheological strength of colloidal liquid metal suspensions |
| 2022-11-04 | 3D-printable, light-weight conductive metal inks based on emulsion templates stabilized by bee pollen microparticles |
| 2022-11-04 | Hydrogel coating of α-Al2O3 microplates using the spreading phenomenon between the three immiscible fluids |
| 2022-11-03 | Direct-writable and thermally one-step curable “water-stained” epoxy/alumina inks with high thermal conductivites |
| 2022-11-03 | An emulsion-type heat transfer fluid with high thermal conductivity and high fluidity, utilizing the shape-deformable liquid metal as the dispersed phase |
| 2022-04-21 | Hydrogel coating of α-Al2O3 microplates using the spreading phenomenon between the three immiscible fluids |
| 2022-04-21 | 3D-printable, light-weight conductive metal inks based on emulsion templates stabilized by bee pollen microparticles |
| 2022-04-21 | Liquid-Suspended and Liquid-Bridged Liquid Metal Microdroplets |
| 2022-04-21 | An emulsion-type heat transfer fluid with high thermal conductivity and high fluidity, utilizing the shape-deformable liquid metal as the dispersed phase |
| 2022-04-21 | Improving the rheological strength of colloidal liquid metal suspensions |
| 2022-04-21 | Direct-writable and thermally one-step curable “water-stained” epoxy/alumina inks with high thermal conductivities |
| 2022-04-21 | Spray-coatable high-concentration aqueous colloidal suspensions of multi-layer MXenes |
| 2021-11-05 | A water-stained heat-conductive alumina/epoxy composites for facile direct ink writing and in-situ thermal curing |
| 2021-11-05 | A 3D-printable and light-weight conductive ink based on a bee-pollen-stabilized Pickering emulsion template |
| 2021-11-03 | Electrostatic stabilization of eutectic gallium-indium (EGaIn) nanoparticles in nonpolar oils |
| 2021-11-03 | Hydrogel coating of α-Al2O3 microplates using the spreading phenomenon between the three immiscible fluids |
| 2021-11-03 | Liquid-Suspended and Liquid-Bridged Liquid Metal Microdroplets |
| 2021-07-07 | 2차원 신소재 멕신(MXene)의 표면개질 연구 |
| 2021-05-14 | Surfactant-mediated electric charging phenomena in nonpolar dispersions |
| 2021-04-22 | Fabrication of high heat dissipation alumina-epoxy composites using capillary attraction between the filler particles |
| 2021-04-22 | Hydrogel coating of a-Al2O3 microplates using the spreading phenomenon between the three immiscible fluids |
| 2021-04-22 | Surfactant-Mediated Electric Charging Phenomena in Nonpolar Dispersions |
| 2021-04-22 | Electrostatic stabilization of eutectic gallium-indium (EGaIn) nanoparticles in nonpolar oils |
| 2021-04-22 | Formulation of the plastic-free 3D printing emulsion ink using naturally occurring bee pollen microparticles |